S3 Power Sports Polaris RZR XP 1000 5" Bracket Lift Kit
|Year||Make / Model|
|2014+||Polaris RZR XP 1000 All Models*|
|* Turbo Models excluded|
The S3 Power Sports RZR XP 1000 5" bracket lift is designed to give you up to 5" of added ground clearance without causing any binding of the factory axles. We have engineered this lift to allow full steer and full droop of the suspension in front and rear without causing any binding in the factory CV joints. The bracket lift is completely bolt on and requires no drilling or cutting in the process of its simple and clean install. Simply reduce the preload and you can return your RZR XP 1000 to factory ride quality. Comes pre-powder coated black.
- Part Number(s):
- Complete "Bolt-on" Design
- Maintains great ride quality while increasing ride height
- Retains factory axles
- Durable Powdercoat finish
- Made in the U.S.A.
- Lifetime Structural Warranty
- Black Only
Great customer service product is made very well pretty easy to install and works just like it says.
Great lift cleared 20s on 35’s no more rubbing and rides good
Easy to install, no problems. took about 1 1/2 hours
Spacer in center off front bracket wouldnt let the bolt go through both holes, both spacers on back brackets are loose even with everything tight. Looks good and seems to be a good product.
Solid bracket lift! Instructions were not that clear but, did not take long to install. I did have to move some wires around on the 2018 RZR High Lifter for proper fitment in the front. Overall, Great product from S3.
The lift wasn’t too difficult to install but the instructions were not very clear and the pictures were not good. The kit was also missing needed washers. Overall, it’s a good lift kit.
Not to difficult to install. The directions aren't as clear as they should be. Toke about 1 1/2 hr to install. Ultimately solid kit with good qaulity parts.
Great height, not a horrible install. Had to move a few wires up front. Rear took more time due to above head tight space. I didnt remove anything but the wheels. Worked around snorkles. Only had to 180 the rear shocks. Reservoir to the front. To the rear the driver side walker reservoir made full contact with the cvt vent tube. I took my time and it went fine. Overall pleased with result and labor involved was not bad. Stock tender springs also opened up well, no more 100% factory compression.
If you're looking to get a true 5" lift, this is the kit to buy. After install I gained 6 1/2" of ground clearance on the front and 5" in the rear and still have favorable axle angles. Thanks S3 for a great product.