Can-Am Outlander (Gen 3) 700 / 500 +2" Stretched High Clearance Rear A-Arm Kit

S3 Power Sports +2" Stretched High Clearance Rear A-Arms for the Can-Am Outlander (Gen 3) 700 / 500 stretch the wheelbase, lift the chassis, and give the rear end the kind of clearance and articulation it takes to crawl out of ruts or blast through deep mud without dragging. With a built-in 1" lift and a +2" rearward stretch, this raked setup pushes the rear wheels back to level the machine and opens the door for up to 34" tires when paired with matching front arms.

The factory rear setup rides low and gets tight fast once you start running oversized tires, loading gear, or hammering through sticky clay. That turns into constant drag, uneven stance, and frame rub, especially with bigger rubber or a lift in the front. Left unbalanced, it feels nose-high and rear-heavy when loaded down, and the stock lower arms end up in the line of fire every time you break into a deep rut or side cut.

This kit fixes that with heavy-wall, high-clearance lower arms that arc up and out of the impact zone, plus a 2" rearward rake that gives taller tires the room they need without hacking plastics or hitting the frame. It corrects the stance, adds strength where it counts, and bolts up clean with no cutting or welding required. Laser-cut and CNC-bent tubing locks in geometry under load, and the included bushings keep the suspension tight and responsive.

This setup is built for Can-Am Outlander (Gen 3) 700 / 500 and comes complete with stretched upper and lower A-arms, hardware, and a full bushing kit. For best performance and proper ride height, pair it with the S3 Power Sports +2" Forward High Clearance Front A-Arm Kit. The front adds a 1" lift to match the rear and gives the whole rig a balanced, leveled-out stance. Every part is made in the U.S.A. and backed by S3's Lifetime Structural Warranty.

If you're hauling tools, towing a trailer, or just cutting your own line through soupy backwoods, these rear arms keep the wheels turning and the tires clear. Matched with the front kit, they turn the Outlander into a leveled-out, high-riding problem solver that's ready to dig in and get dirty. No more dragging, no more rubbing, just clean lines, full flex, and zero compromise.

NOTE: With the +1" lift that is built in we highly suggest you run the +2" Forward High Clearance Front A-Arm Kit to ensure a level ride for your Can-Am Outlander (Gen 3) 700 / 500.

• Part Number(s): S3292, S3291
• Set include(s): (2) +2" Stretched Upper A-Arms, (2) +2" Stretched Lower High Clearance A-Arms, (1) Hardware Kit, (1) Bushing Kit
• High Clearance
• Tubular Design
• Built-in 1" lift
• Completely Bolt-On
• Laser-Cut and CNC Bent for Precise Fitment
• Made in the U.S.A.
• Lifetime Structural Warranty