Can-Am Outlander (Gen 3) 1000R / 850 +2" Stretched High Clearance Rear A-Arm Kit
Starting at
$1,049
Set include(s): (2) +2" Stretched Upper A-Arms, (2) +2" Stretched Lower High Clearance A-Arms, (1) Hardware Kit, (1) Bushing Kit, High Clearance, Tubular Design, Built-in 1" lift, Completely ... Made in the U.S.A., Lifetime Structural Warranty. More Details
| Year | Make / Model |
|---|---|
| 2024+ | Can-Am Outlander (Gen 3) 1000R All Models |
| 2024+ | Can-Am Outlander (Gen 3) 850 All Models |
S3 Power Sports +2" Stretched High Clearance Rear A-Arms for the Can-Am Outlander (Gen 3) 1000R / 850 stretch the wheelbase, raise the rear end, and correct rear geometry for oversized tires and rough terrain. With a +2" rearward stretch and a 1" lift built in, this raked setup clears the space needed for up to 34" tires and helps the chassis ride level when paired with the matching front kit.
The stock rear suspension can struggle once the front has been lifted or forward arms are added. Bigger tires rub at full compression, articulation suffers, and the rear sits low when towing, hauling, or loaded with gear. That imbalance throws off the ride and makes rough terrain harder to manage.
This kit solves the problem with a rearward axle shift that gives tall tires room to work, plus high-clearance arms that arc above ruts and trail debris. The 1" lift helps carry load while improving rear departure angle. Laser-cut, CNC-bent steel arms are stronger than stock and built to take abuse. The included bushings and bolt-on hardware make install quick and service straightforward.
Engineered specifically for the Outlander (Gen 3) 1000R / 850, the kit includes upper and lower rear A-arms, hardware, and a complete bushing set. Pairing with the +2" Forward Front A-Arms levels the chassis and creates a clean path for 34" tires with no trimming. Made in the U.S.A. and covered under the S3 Lifetime Structural Warranty.
If your Outlander needs more tire, more clearance, and more confidence when loaded down or locked into deep ruts, this rear setup is the fix. It's the go-to rear end for work, mud, or all-day trail riding with big expectations.
NOTE: With the +1" lift that is built in we highly suggest you run the +2" Forward High Clearance Front A-Arm Kit to ensure a level ride for your Can-Am Outlander (Gen 3) 1000R / 850.
- Part Number(s): S3333, S3332
- Set include(s): (2) +2" Stretched Upper A-Arms, (2) +2" Stretched Lower High Clearance A-Arms, (1) Hardware Kit, (1) Bushing Kit
- High Clearance
- Tubular Design
- Built-in 1" lift
- Completely Bolt-On
- Laser-Cut and CNC Bent for Precise Fitment
- Made in the U.S.A.
- Lifetime Structural Warranty
