Evolution Powersports Can-Am Maverick X3 "Captain's Choice" Cutout Exhaust Non-Adjustable
The Captain's Choice slip on is a "cut-out style" exhaust and is only slightly louder than as the OEM with the cut out valve closed, but with it open, you will hear the 3 cylinder Rotax engine sing! The built in-house, 304 Stainless Steel muffler has two pathways inside - a boost actuated exhaust valve controls whether the exhaust has to go through the quiet channel, or the second path which is a straight pipe through the muffler. The cutout valve can be operated two ways: An EVP supplied connection and hose that supplies boost pressure directly to the valve. This is the simplest installation and opens the cutout valve at approximately 5 PSI of boost. Below 5 PSI and the valve is closed and the exhaust is quiet. The second is with an EVP supplied adjustment valve. This allows for the valve to remain closed regardless of boost pressure (for sound sensitive areas, or rides with the family), or adjust the point at which the valve opens. Detailed instructions are included.
The X3 Captains Choice has installation options as well ÛÒ with or without the OEM rear valence. With the factory rear valence option, the exhaust comes with a water jetted and powder coated aluminum block off plate for the factory exhaust hole. The plate can be powder coated any of the Can-Am Maverick X3 colors. This option also comes with a template for minor side trimming of the OEM rear valence where the exhaust pipes exit the EVP muffler. If you choose not to reuse the OEM valence, the exhaust comes with an aluminum heat shield which gives the rear of the Maverick X3 a nice finished look.
- Slip on TIG Welded, 304 Stainless Steel exhaust
- First in the industry production ÛÏCut OutÛ Style Exhaust for the Can-Am Maverick X3
- Up to 6 additional horsepower with the cut out open (depending upon tune)
- Simple installation with detailed instructions included
- Spark arrestors included
- No electrical wiring required
- Made in the USA